dmesg - btrfs - 14 SSDs
ACPI: PMCT 0x0000000079AFF7F8 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x0000000079AFF860 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x0000000079AFF890 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x0000000079B006E8 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079B00728 00EDE7 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: SPCR 0x0000000079B0F510 000050 (v01 A M I APTIO V 01072009 AMI. 00000005)
ACPI: SSDT 0x0000000079B0F560 00211D (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x0000000079B11680 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x0000000079B116E8 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079B117F0 0000CC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: HEST 0x0000000079B118C0 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: BERT 0x0000000079B11968 000030 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: ERST 0x0000000079B11998 000230 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079B11BC8 000130 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
NODE_DATA(0) allocated [mem 0x87fff9000-0x87fffcfff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000094fff]
node 0: [mem 0x0000000000100000-0x00000000794fefff]
node 0: [mem 0x000000007bd5b000-0x000000007bd5bfff]
node 0: [mem 0x000000007bde2000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8361650
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3988 pages, LIFO batch:0
DMA32 zone: 7709 pages used for memmap
DMA32 zone: 493342 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x794ff000-0x79ac4fff]
PM: Registered nosave memory: [mem 0x79ac5000-0x79b11fff]
PM: Registered nosave memory: [mem 0x79b12000-0x7a068fff]
PM: Registered nosave memory: [mem 0x7a069000-0x7bd5afff]
PM: Registered nosave memory: [mem 0x7bd5c000-0x7bde1fff]
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88087fc00000 s93912 r8192 d28968 u131072
pcpu-alloc: s93912 r8192 d28968 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8230976
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32825048K/33446600K available (5382K kernel code, 1099K rwdata, 1896K rodata, 1248K init, 840K bss, 621552K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:960 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3199.717 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.43 BogoMIPS (lpj=12798868)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81a4c000 - ffffffff81a51000)
ftrace: allocating 23088 entries in 91 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007bc4d000 end: 0x0000007bc5bfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x36, date = 2015-08-10
TSC synchronization [CPU#0 -> CPU#1]:
Measured 212 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x36, date = 2015-08-10
#3
microcode: CPU3 microcode updated early to revision 0x36, date = 2015-08-10
#4
microcode: CPU4 microcode updated early to revision 0x36, date = 2015-08-10
#5
microcode: CPU5 microcode updated early to revision 0x36, date = 2015-08-10
#6
microcode: CPU6 microcode updated early to revision 0x36, date = 2015-08-10
#7
microcode: CPU7 microcode updated early to revision 0x36, date = 2015-08-10
#8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (102390.94 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x79b12000-0x7a068fff] (5599232 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb619000-0xfb619fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb618000-0xfb6187ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [8086:1528] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xf2a00000-0xf2bfffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:01:00.0: reg 0x20: [mem 0xf2c04000-0xf2c07fff 64bit pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:01:00.1: [8086:1528] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xf2800000-0xf29fffff 64bit pref]
pci 0000:01:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:01:00.1: reg 0x20: [mem 0xf2c00000-0xf2c03fff 64bit pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf2800000-0xf2cfffff 64bit pref]
pci 0000:02:00.0: [111d:8018] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:03:02.0: [111d:8018] type 01 class 0x060400
pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
pci 0000:03:04.0: [111d:8018] type 01 class 0x060400
pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:04:00.0: [8086:1526] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb420000-0xfb43ffff]
pci 0000:04:00.0: reg 0x18: [io 0xb020-0xb03f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb444000-0xfb447fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:04:00.1: [8086:1526] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb400000-0xfb41ffff]
pci 0000:04:00.1: reg 0x18: [io 0xb000-0xb01f]
pci 0000:04:00.1: reg 0x1c: [mem 0xfb440000-0xfb443fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:03:02.0: PCI bridge to [bus 04]
pci 0000:03:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:02.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:03:02.0: bridge has subordinate 04 but max busn 05
pci 0000:05:00.0: [8086:1526] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfb320000-0xfb33ffff]
pci 0000:05:00.0: reg 0x18: [io 0xa020-0xa03f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfb344000-0xfb347fff]
pci 0000:05:00.0: PME# supported from D0 D3hot
pci 0000:05:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.1: [8086:1526] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:05:00.1: reg 0x18: [io 0xa000-0xa01f]
pci 0000:05:00.1: reg 0x1c: [mem 0xfb340000-0xfb343fff]
pci 0000:05:00.1: PME# supported from D0 D3hot
pci 0000:05:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:03:04.0: PCI bridge to [bus 05]
pci 0000:03:04.0: bridge window [io 0xa000-0xafff]
pci 0000:03:04.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:03:04.0: bridge has subordinate 05 but max busn 06
pci 0000:06:00.0: [8086:1528] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf2400000-0xf25fffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xf2604000-0xf2607fff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0xfb580000-0xfb5fffff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot
pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:06:00.1: [8086:1528] type 00 class 0x020000
pci 0000:06:00.1: reg 0x10: [mem 0xf2200000-0xf23fffff 64bit pref]
pci 0000:06:00.1: reg 0x20: [mem 0xf2600000-0xf2603fff 64bit pref]
pci 0000:06:00.1: reg 0x30: [mem 0xfb500000-0xfb57ffff pref]
pci 0000:06:00.1: PME# supported from D0 D3hot
pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:02.2: PCI bridge to [bus 06]
pci 0000:00:02.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:02.2: bridge window [mem 0xf2200000-0xf26fffff 64bit pref]
pci 0000:07:00.0: [10de:13ba] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:07:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:07:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:07:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:08:00.0: [1000:0097] type 00 class 0x010700
pci 0000:08:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:08:00.0: reg 0x14: [mem 0xfb200000-0xfb20ffff 64bit]
pci 0000:08:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: reg 0x174: [mem 0x00000000-0x0000ffff 64bit]
pci 0000:08:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 16 VFs)
pci 0000:00:03.2: PCI bridge to [bus 08]
pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.2: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:07:00.0
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00095400-0x0009ffff]
e820: reserve RAM buffer [mem 0x794ff000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd5c000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 3 pci_try_num: 4
pci 0000:00:01.0: BAR 14: assigned [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:01:00.0: BAR 7: assigned [mem 0x90000000-0x900fffff 64bit]
pci 0000:01:00.0: BAR 10: assigned [mem 0x90100000-0x901fffff 64bit]
pci 0000:01:00.1: BAR 7: assigned [mem 0x90200000-0x902fffff 64bit]
pci 0000:01:00.1: BAR 10: assigned [mem 0x90300000-0x903fffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0x903fffff]
pci 0000:00:01.0: bridge window [mem 0xf2800000-0xf2cfffff 64bit pref]
pci 0000:02:00.0: BAR 15: assigned [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:03:02.0: BAR 15: assigned [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:03:04.0: BAR 15: assigned [mem 0x90500000-0x905fffff 64bit pref]
pci 0000:04:00.0: BAR 7: assigned [mem 0x90400000-0x9041ffff 64bit pref]
pci 0000:04:00.0: BAR 10: assigned [mem 0x90420000-0x9043ffff 64bit pref]
pci 0000:04:00.1: BAR 7: assigned [mem 0x90440000-0x9045ffff 64bit pref]
pci 0000:04:00.1: BAR 10: assigned [mem 0x90460000-0x9047ffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 04]
pci 0000:03:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:02.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:03:02.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:05:00.0: BAR 7: assigned [mem 0x90500000-0x9051ffff 64bit pref]
pci 0000:05:00.0: BAR 10: assigned [mem 0x90520000-0x9053ffff 64bit pref]
pci 0000:05:00.1: BAR 7: assigned [mem 0x90540000-0x9055ffff 64bit pref]
pci 0000:05:00.1: BAR 10: assigned [mem 0x90560000-0x9057ffff 64bit pref]
pci 0000:03:04.0: PCI bridge to [bus 05]
pci 0000:03:04.0: bridge window [io 0xa000-0xafff]
pci 0000:03:04.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:03:04.0: bridge window [mem 0x90500000-0x905fffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:02:00.0: bridge window [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:00:02.0: bridge window [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:06:00.0: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:06:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:06:00.0: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:06:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:06:00.1: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:06:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:06:00.1: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:06:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:00:02.2: PCI bridge to [bus 06]
pci 0000:00:02.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:02.2: bridge window [mem 0xf2200000-0xf26fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:08:00.0: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:08:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:00:03.2: PCI bridge to [bus 08]
pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.2: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
pci_bus 0000:00: No. 2 try to assign unassigned res
release child resource [mem 0xfb100000-0xfb1fffff pref]
release child resource [mem 0xfb200000-0xfb20ffff 64bit]
pci 0000:00:03.2: resource 14 [mem 0xfb100000-0xfb2fffff] released
pci 0000:00:03.2: PCI bridge to [bus 08]
release child resource [mem 0xfb500000-0xfb57ffff pref]
release child resource [mem 0xfb580000-0xfb5fffff pref]
pci 0000:00:02.2: resource 14 [mem 0xfb500000-0xfb5fffff] released
pci 0000:00:02.2: PCI bridge to [bus 06]
pci 0000:00:02.2: BAR 14: assigned [mem 0x90600000-0x90afffff]
pci 0000:00:03.2: BAR 14: assigned [mem 0x90b00000-0x90dfffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0x903fffff]
pci 0000:00:01.0: bridge window [mem 0xf2800000-0xf2cfffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 04]
pci 0000:03:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:02.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:03:02.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:03:04.0: PCI bridge to [bus 05]
pci 0000:03:04.0: bridge window [io 0xa000-0xafff]
pci 0000:03:04.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:03:04.0: bridge window [mem 0x90500000-0x905fffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:02:00.0: bridge window [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:00:02.0: bridge window [mem 0x90400000-0x905fffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0x90600000-0x9067ffff pref]
pci 0000:06:00.1: BAR 6: assigned [mem 0x90680000-0x906fffff pref]
pci 0000:06:00.0: BAR 7: assigned [mem 0x90700000-0x907fffff 64bit]
pci 0000:06:00.0: BAR 10: assigned [mem 0x90800000-0x908fffff 64bit]
pci 0000:06:00.1: BAR 7: assigned [mem 0x90900000-0x909fffff 64bit]
pci 0000:06:00.1: BAR 10: assigned [mem 0x90a00000-0x90afffff 64bit]
pci 0000:00:02.2: PCI bridge to [bus 06]
pci 0000:00:02.2: bridge window [mem 0x90600000-0x90afffff]
pci 0000:00:02.2: bridge window [mem 0xf2200000-0xf26fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:08:00.0: BAR 6: assigned [mem 0x90b00000-0x90bfffff pref]
pci 0000:08:00.0: BAR 1: assigned [mem 0x90c00000-0x90c0ffff 64bit]
pci 0000:08:00.0: BAR 7: assigned [mem 0x90c10000-0x90d0ffff 64bit]
pci 0000:00:03.2: PCI bridge to [bus 08]
pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.2: bridge window [mem 0x90b00000-0x90dfffff]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x90000000-0x903fffff]
pci_bus 0000:01: resource 2 [mem 0xf2800000-0xf2cfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfb300000-0xfb4fffff]
pci_bus 0000:02: resource 2 [mem 0x90400000-0x905fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfb300000-0xfb4fffff]
pci_bus 0000:03: resource 2 [mem 0x90400000-0x905fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:04: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:05: resource 2 [mem 0x90500000-0x905fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0x90600000-0x90afffff]
pci_bus 0000:06: resource 2 [mem 0xf2200000-0xf26fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0x90b00000-0x90dfffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Video device with shadowed ROM
Unpacking initramfs...
Freeing initrd memory: 17364K (ffff880035e06000 - ffff880036efb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x754ff000-0x794ff000] (64MB) mapped at [ffff8800754ff000-ffff8800794fefff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1f3ebaee2, max_idle_ns: 440795345089 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x36
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455808322.708:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:02.2:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:03.2:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:03:04.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
zswap: loaded using pool lzo/zbud
rtc_cmos 00:00: setting system clock to 2016-02-18 15:12:03 UTC (1455808323)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1248K (ffffffff81914000 - ffffffff81a4c000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
Freeing unused kernel memory: 152K (ffff8800017da000 - ffff880001800000)
systemd-udevd[148]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.3
Copyright (c) 1999-2015 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 5.3.3.5
Copyright (c) 2007-2015 Intel Corporation.
pmd_set_huge: Cannot satisfy [mem 0xf2a00000-0xf2c00000] with a huge-page mapping due to MTRR override.
ixgbe: Multiple Queue Support Enabled
ixgbe: Direct Cache Access (DCA) set to 2
ixgbe: 0000:01:00.0: ixgbe_check_options: DCA enabled for rx data
ixgbe: Interrupt Throttling Rate (ints/sec) set to 1000
ixgbe: 0000:01:00.0: ixgbe_check_options: FCoE Offload feature enabled
igb: 0000:04:00.0: igb_validate_option: RSS - RSS multiqueue receive count set to 8
igb: 0000:04:00.0: igb_validate_option: QueuePairs - Tx/Rx queue pairs for interrupt handling Enabled
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
mpt3sas version 09.100.00.00 loaded
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
mpt3sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32844584 kB)
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.3.1 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.3.1 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
mpt3sas0: MSI-X vectors supported: 96, no of cores: 16, max_msix_vectors: -1
mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 45
mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 46
mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 47
mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 49
mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 50
mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 51
mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 52
mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 53
mpt3sas0: iomem(0x0000000090c00000), mapped(0xffffc90003600000), size(65536)
mpt3sas0: ioport(0x000000000000c000), size(256)
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb618000 port 0xfb618100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xfb618000 port 0xfb618180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xfb618000 port 0xfb618200 irq 44
ata4: SATA max UDMA/133 abar m2048@0xfb618000 port 0xfb618280 irq 44
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 33
ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 33
ata7: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 33
ata8: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 33
ata9: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 33
ata10: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 33
mpt3sas0: Allocated physical memory: size(11033 kB)
mpt3sas0: Current Controller Queue Depth(3835),Max Controller Queue Depth(4096)
mpt3sas0: Scatter Gather Elements per IO(128)
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5GT/s:Width x4)
igb 0000:04:00.0 eth0: MAC: 90:e2:ba:78:ba:14
igb 0000:04:00.0: eth0: PBA No: E91609-006
igb 0000:04:00.0: LRO is disabled
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb: 0000:04:00.1: igb_validate_option: RSS - RSS multiqueue receive count set to 8
igb: 0000:04:00.1: igb_validate_option: QueuePairs - Tx/Rx queue pairs for interrupt handling Enabled
mpt3sas0: LSISAS3008: FWVersion(02.00.00.00), ChipRevision(0x02), BiosVersion(08.03.00.00)
mpt3sas0: Protocol=(
Initiator
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt3sas0: sending port enable !!
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata2.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
ata2.00: disabling queued TRIM support
scsi: waiting for bus probes to complete ...
ata2.00: configured for UDMA/133
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata7.00: supports DRM functions and may not be fully accessible
ata10.00: supports DRM functions and may not be fully accessible
ata9.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata6.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata5.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata7.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata7.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata10.00: disabling queued TRIM support
ata10.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata10.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata9.00: disabling queued TRIM support
ata9.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata9.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: disabling queued TRIM support
ata8.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133
ata8.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata7.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata10.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata7.00: disabling queued TRIM support
ata8.00: supports DRM functions and may not be fully accessible
ata9.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata10.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
ata7.00: configured for UDMA/133
ata9.00: disabling queued TRIM support
ata8.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata10.00: configured for UDMA/133
ata8.00: configured for UDMA/133
ata9.00: configured for UDMA/133
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:2.5GT/s:Width x4)
igb 0000:04:00.1 eth1: MAC: 90:e2:ba:78:ba:15
igb 0000:04:00.1: eth1: PBA No: E91609-006
igb 0000:04:00.1: LRO is disabled
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb: 0000:05:00.0: igb_validate_option: RSS - RSS multiqueue receive count set to 8
igb: 0000:05:00.0: igb_validate_option: QueuePairs - Tx/Rx queue pairs for interrupt handling Enabled
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: New USB device found, idVendor=046d, idProduct=c31d
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: Logitech
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C31D.0001/input/input0
hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C31D.0002/input/input1
usb 3-2: new low-speed USB device number 3 using xhci_hcd
hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
ixgbe 0000:01:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:01:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:01:00.0 eth2: MAC: 3, PHY: 3, PBA No: 000000-000
ixgbe 0000:01:00.0: d0:50:99:79:48:c2
ixgbe 0000:01:00.0 eth2: Enabled Features: RxQ: 16 TxQ: 16 FdirHash
ixgbe 0000:01:00.0 eth2: Intel(R) 10 Gigabit Network Connection
ixgbe: Multiple Queue Support Enabled
ixgbe: Direct Cache Access (DCA) set to 2
ixgbe: 0000:01:00.1: ixgbe_check_options: DCA enabled for rx data
ixgbe: Interrupt Throttling Rate (ints/sec) set to 1000
ixgbe: 0000:01:00.1: ixgbe_check_options: FCoE Offload feature enabled
igb 0000:05:00.0: added PHC on eth3
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth3: (PCIe:2.5GT/s:Width x4)
igb 0000:05:00.0 eth3: MAC: 90:e2:ba:78:ba:16
igb 0000:05:00.0: eth3: PBA No: E91609-006
igb 0000:05:00.0: LRO is disabled
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb: 0000:05:00.1: igb_validate_option: RSS - RSS multiqueue receive count set to 8
igb: 0000:05:00.1: igb_validate_option: QueuePairs - Tx/Rx queue pairs for interrupt handling Enabled
usb 3-2: New USB device found, idVendor=046d, idProduct=c05a
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Optical Mouse
usb 3-2: Manufacturer: Logitech
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C05A.0003/input/input2
hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
usb 3-3: new high-speed USB device number 4 using xhci_hcd
igb 0000:05:00.1: added PHC on eth4
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth4: (PCIe:2.5GT/s:Width x4)
igb 0000:05:00.1 eth4: MAC: 90:e2:ba:78:ba:17
igb 0000:05:00.1: eth4: PBA No: E91609-006
igb 0000:05:00.1: LRO is disabled
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usb 3-3: New USB device found, idVendor=2001, idProduct=1a02
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: DUB-E100
usb 3-3: Manufacturer: D-Link
usb 3-3: SerialNumber: D35A94
ixgbe 0000:01:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:01:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:01:00.1 eth5: MAC: 3, PHY: 3, PBA No: 000000-000
ixgbe 0000:01:00.1: d0:50:99:79:48:c1
ixgbe 0000:01:00.1 eth5: Enabled Features: RxQ: 16 TxQ: 16 FdirHash
ixgbe 0000:01:00.1 eth5: Intel(R) 10 Gigabit Network Connection
ixgbe: 0000:06:00.0: ixgbe_check_options: FCoE Offload feature enabled
mpt3sas0: host_add: handle(0x0001), sas_addr(0x500138f00000e610), phys(8)
ixgbe 0000:06:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:06:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:06:00.0 eth6: MAC: 3, PHY: 3, PBA No: G45270-003
ixgbe 0000:06:00.0: a0:36:9f:69:cc:a0
ixgbe 0000:06:00.0 eth6: Enabled Features: RxQ: 16 TxQ: 16 FdirHash
ixgbe 0000:06:00.0 eth6: Intel(R) 10 Gigabit Network Connection
ixgbe: 0000:06:00.1: ixgbe_check_options: FCoE Offload feature enabled
ixgbe 0000:06:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:06:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:06:00.1 eth7: MAC: 3, PHY: 3, PBA No: G45270-003
ixgbe 0000:06:00.1: a0:36:9f:69:cc:a2
ixgbe 0000:06:00.1 eth7: Enabled Features: RxQ: 16 TxQ: 16 FdirHash
ixgbe 0000:06:00.1 eth7: Intel(R) 10 Gigabit Network Connection
mpt3sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50025388400a0106)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x50025388400a0109)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(1)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x500253884009f832)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(2)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:3:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x500253884009f15b)
scsi 0:0:3:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(3)
scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:4:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x500253884008da07)
scsi 0:0:4:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(4)
scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:5:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221105000000), phy(5), device_name(0x500253884008da0a)
scsi 0:0:5:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(5)
scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:6:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x500253884008da14)
scsi 0:0:6:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(6)
scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:7:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 6
scsi 0:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x500253884008da0d)
scsi 0:0:7:0: SATA: enclosure_logical_id(0x500138f00000e610), slot(7)
scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdj] 500118192 512-byte logical blocks: (256 GB/238 GiB)
scsi 8:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 2:0:0:0: [sdk] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 2:0:0:0: [sdk] Write Protect is off
sd 2:0:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdj] Write Protect is off
sd 1:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdl] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 2:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 1:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdl] Write Protect is off
sd 5:0:0:0: [sdl] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdm] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 6:0:0:0: [sdm] Write Protect is off
sd 6:0:0:0: [sdm] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 8:0:0:0: [sdn] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 8:0:0:0: [sdn] Write Protect is off
sd 8:0:0:0: [sdn] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sde] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:0:4:0: [sdf] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:0:5:0: [sdg] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:0:6:0: [sdh] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:0:7:0: [sdi] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
scsi 9:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 9:0:0:0: [sdo] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 9:0:0:0: [sdo] Write Protect is off
sd 9:0:0:0: [sdo] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 9:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:0:4:0: Attached scsi generic sg4 type 0
scsi 10:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:5:0: Attached scsi generic sg5 type 0
sd 0:0:6:0: Attached scsi generic sg6 type 0
sd 0:0:7:0: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdp] 2000409264 512-byte logical blocks: (1.02 TB/953 GiB)
sd 1:0:0:0: Attached scsi generic sg8 type 0
sd 2:0:0:0: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdp] Write Protect is off
sd 10:0:0:0: [sdp] Mode Sense: 00 3a 00 00
sd 5:0:0:0: Attached scsi generic sg10 type 0
sd 10:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: Attached scsi generic sg11 type 0
sd 7:0:0:0: Attached scsi generic sg12 type 0
sdj: sdj1
sd 8:0:0:0: Attached scsi generic sg13 type 0
sd 9:0:0:0: Attached scsi generic sg14 type 0
sd 7:0:0:0: [sdd] Attached SCSI disk
sd 10:0:0:0: Attached scsi generic sg15 type 0
sd 2:0:0:0: [sdk] Attached SCSI disk
sd 5:0:0:0: [sdl] Attached SCSI disk
sd 6:0:0:0: [sdm] Attached SCSI disk
sd 8:0:0:0: [sdn] Attached SCSI disk
sd 1:0:0:0: [sdj] Attached SCSI disk
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 9b 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 9b 00 10 08
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 9b 00 10 08
sd 0:0:3:0: [sde] Write Protect is off
sd 0:0:3:0: [sde] Mode Sense: 9b 00 10 08
sd 0:0:4:0: [sdf] Write Protect is off
sd 0:0:4:0: [sdf] Mode Sense: 9b 00 10 08
sd 9:0:0:0: [sdo] Attached SCSI disk
sd 0:0:6:0: [sdh] Write Protect is off
sd 0:0:6:0: [sdh] Mode Sense: 9b 00 10 08
sd 0:0:7:0: [sdi] Write Protect is off
sd 0:0:7:0: [sdi] Mode Sense: 9b 00 10 08
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 10:0:0:0: [sdp] Attached SCSI disk
sd 0:0:5:0: [sdg] Write Protect is off
sd 0:0:5:0: [sdg] Mode Sense: 9b 00 10 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:4:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:6:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:7:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:5:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:4:0: [sdf] Attached SCSI disk
sd 0:0:3:0: [sde] Attached SCSI disk
sd 0:0:5:0: [sdg] Attached SCSI disk
sd 0:0:7:0: [sdi] Attached SCSI disk
sd 0:0:6:0: [sdh] Attached SCSI disk
raid6: sse2x1 gen() 6538 MB/s
raid6: sse2x1 xor() 6535 MB/s
raid6: sse2x2 gen() 12512 MB/s
raid6: sse2x2 xor() 8736 MB/s
raid6: sse2x4 gen() 15028 MB/s
raid6: sse2x4 xor() 10560 MB/s
raid6: avx2x1 gen() 19980 MB/s
raid6: avx2x2 gen() 23004 MB/s
raid6: avx2x4 gen() 26883 MB/s
raid6: using algorithm avx2x4 gen() 26883 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 32417.000 MB/sec
Btrfs loaded
BTRFS: device label data devid 5 transid 214 /dev/sdd
BTRFS: device label data devid 9 transid 214 /dev/sdk
BTRFS: device label data devid 10 transid 214 /dev/sdl
BTRFS: device label data devid 11 transid 214 /dev/sdm
BTRFS: device label data devid 12 transid 214 /dev/sdn
BTRFS: device label data devid 13 transid 214 /dev/sdo
BTRFS: device label data devid 14 transid 214 /dev/sdp
BTRFS: device label data devid 1 transid 214 /dev/sda
BTRFS: device label data devid 2 transid 214 /dev/sdb
BTRFS: device label data devid 3 transid 214 /dev/sdc
BTRFS: device label data devid 4 transid 214 /dev/sde
BTRFS: device label data devid 6 transid 214 /dev/sdf
BTRFS: device label data devid 8 transid 214 /dev/sdh
BTRFS: device label data devid 7 transid 214 /dev/sdg
EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.23)
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
systemd-udevd[388]: starting version 215
EXT4-fs (sdj1): re-mounted. Opts: errors=remount-ro
systemd-journald[378]: Received request to flush runtime journal from PID 1
ttyS2: LSR safety check engaged!
ttyS2: LSR safety check engaged!
ttyS3: LSR safety check engaged!
ttyS3: LSR safety check engaged!
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ixgbe 0000:06:00.1 ixgbe3: renamed from eth7
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:07:00.1: Disabling MSI
snd_hda_intel 0000:07:00.1: Handle VGA-switcheroo audio client
input: PC Speaker as /devices/platform/pcspkr/input/input5
Error: Driver 'pcspkr' is already registered, aborting...
ixgbe 0000:01:00.1 ixgbe1: renamed from eth5
systemd-udevd[428]: renamed network interface eth7 to ixgbe3
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
systemd-udevd[425]: renamed network interface eth5 to ixgbe1
igb 0000:04:00.1 igb1: renamed from eth1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
vgaarb: device changed decodes: PCI:0000:07:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
systemd-udevd[433]: renamed network interface eth1 to igb1
igb 0000:05:00.1 igb3: renamed from eth4
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:07:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
random: nonblocking pool is initialized
igb 0000:04:00.0 igb0: renamed from eth0
systemd-udevd[443]: renamed network interface eth4 to igb3
igb 0000:05:00.0 igb2: renamed from eth3
systemd-udevd[429]: renamed network interface eth0 to igb0
ipmi_si IPI0001:00: Found new BMC (man_id: 0x000000, prod_id: 0xaabb, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ixgbe 0000:01:00.0 ixgbe0: renamed from eth2
systemd-udevd[432]: renamed network interface eth3 to igb2
ixgbe 0000:06:00.0 ixgbe2: renamed from eth6
systemd-udevd[424]: renamed network interface eth2 to ixgbe0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
systemd-udevd[427]: renamed network interface eth6 to ixgbe2
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card0/input8
asix 3-3:1.0 eth0: register 'asix' at usb-0000:00:14.0-3, ASIX AX88772 USB 2.0 Ethernet, c8:be:19:d3:5a:94
usbcore: registered new interface driver asix
asix 3-3:1.0 eth6: renamed from eth0
systemd-udevd[424]: renamed network interface eth0 to eth6
IPv6: ADDRCONF(NETDEV_UP): igb0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): igb1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): igb2: link is not ready
pps pps0: new PPS source ptp4
ixgbe 0000:01:00.0: registered PHC device on ixgbe0
ixgbe 0000:01:00.0 ixgbe0: MNG_VETO bit detected.
IPv6: ADDRCONF(NETDEV_UP): ixgbe0: link is not ready
ixgbe 0000:01:00.0 ixgbe0: NIC Link is Up 1 Gbps, Flow Control: RX/TX
pps pps1: new PPS source ptp5
ixgbe 0000:01:00.1: registered PHC device on ixgbe1
IPv6: ADDRCONF(NETDEV_UP): ixgbe1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): ixgbe0: link becomes ready
pps pps2: new PPS source ptp6
ixgbe 0000:06:00.0: registered PHC device on ixgbe2
IPv6: ADDRCONF(NETDEV_UP): ixgbe2: link is not ready
pps pps3: new PPS source ptp7
ixgbe 0000:06:00.1: registered PHC device on ixgbe3
IPv6: ADDRCONF(NETDEV_UP): ixgbe3: link is not ready
ixgbe 0000:01:00.0 ixgbe0: changing MTU from 1500 to 9000
ixgbe 0000:01:00.0 ixgbe0: MNG_VETO bit detected.
ixgbe 0000:06:00.0 ixgbe2: changing MTU from 1500 to 9000
ixgbe 0000:01:00.0 ixgbe0: NIC Link is Up 1 Gbps, Flow Control: RX/TX
ixgbe 0000:01:00.1 ixgbe1: changing MTU from 1500 to 9000
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ixgbe 0000:06:00.1 ixgbe3: changing MTU from 1500 to 9000
ixgbe 0000:01:00.1 ixgbe1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): ixgbe1: link becomes ready
asix 3-3:1.0 eth6: link up, 100Mbps, full-duplex, lpa 0xCDE1
asix 3-3:1.0 eth6: link up, 100Mbps, full-duplex, lpa 0xCDE1
BTRFS info (device sdg): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
nvidia_uvm: Loaded the UVM driver, major device number 246
ata10.00: exception Emask 0x10 SAct 0x2000 SErr 0x280100 action 0x6 frozen
ata10.00: irq_stat 0x08000000, interface fatal error
ata10: SError: { UnrecovData 10B8B BadCRC }
ata10.00: failed command: READ FPDMA QUEUED
ata10.00: cmd 60/80:68:80:84:6f/1e:00:00:00:00/40 tag 13 ncq 3997696 in
res 40/00:68:80:84:6f/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata10.00: status: { DRDY }
ata10: hard resetting link
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: supports DRM functions and may not be fully accessible
ata10.00: disabling queued TRIM support
ata10.00: supports DRM functions and may not be fully accessible
ata10.00: disabling queued TRIM support
ata10.00: configured for UDMA/133
ata10: EH complete
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000